Products

The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also.

The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement. Other makes offer same hardness through out the length of the blade, which is not scientific.

Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is wear resistance.

The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.

  • View Details

    flat

    PROD.NO TIP SIZE B x T A C D L WT.GMS
    932 0.6 x 0.4 50 13 3.0 110 10
    933 1.6 x 0.4 75 13 3.0 135 12
    911 3.0 x 0.4 50 13 3.0 110 10
    901 3.0 x 0.5 75 17 3.0 150 21
    902 3.0 x 0.4 100 17 3.0 175 22
    912 3.5 x 0.5 75 14 3.5 140 16
    842 3.5 x 0.5 150 17 3.5 225 35
    913 4.0 x 0.6 100 18 4.0 18 30
    712 4.0 x 0.6 125 17 4.0 200 30
    833 4.0 x 0.6 200 18 4.0 280 40
    713 5.0 x 0.6 75 18 5.0 155 35
    936 5.0 x 0.8 150 22 5.0 236 60
    921 6.0 x 0.6 75 22 6.0 161 55
    922 6.0 x 6.0 100 22 6.0 186 60
    923 6.0 x 0.8 125 22 6.0 211 62
    824 6.0 x 0.8 150 22 6.0 236 65
    825 6.0 x 0.8 200 22 6.0 286 77
    826 6.0 x 0.8 250 22 6.0 336 90
    924 8.0 x 1.2 125 28 8.0 230 115
    925 8.0 x 1.2 150 28 8.0 255 130
    926 8.0 x 1.2 175 28 8.0 280 130
    827 8.0 x 1.2 200 28 8.0 305 145
    828 8.0 x 1.2 250 28 8.0 355 165
    829 8.0 x 1.2 300 28 8.0 405 180
    725 10.0 x 1.2 150 26 8.0 248 120
    927 10.0 x 1.2 200 34 10.0 327 245
    928 10.0 x 1.2 250 34 10.0 377 275
    929 10.0 x 1.5 300 34 10.0 427 310
    930 10.0 X 1.5 400 34 10.0 527 365
    931 13.0 x 1.9 450 34 10.0 577 395

Taparia Screwdriver Group (Flat Screw Drivers)

The blade is made from high grade Silicon – Manganese steel which no other make uses. This steel gives spring effect also. The blade is differently […]

Login

Lost your password?